Objectives of the service
Satellites and their ground infrastructure have become critical infrastructure, yet their cyber attack surface – onboard firmware, radio-frequency and command links, mission control and ground stations – is rarely tested independently. Conventional penetration testers are IT-oriented, large primes are seldom independent of the systems they deliver, and intrusive testing of a satellite in orbit is not acceptable. At the same time, NIS2, the proposed EU Space Act and ECSS-E-ST-80C are raising the demand for security evidence.
SAThical makes satellite cyber risk verified before it becomes mission risk. The service provides independent, customer-authorised security assessments of a defined spacecraft, link or ground target, performed on engineering models, FlatSat/hardware-in-the-loop set-ups, controlled RF environments and representative ground systems. Every result states the tested configuration, the observed behaviour, the applicable requirement, the limitations, the recommended remediation and the retest status, so customers receive prioritised, decision-ready evidence instead of a generic test report.
The ESA Kick-Start activity validated the user needs, defined the service and its architecture, proved the critical technical aspects and established the business case for commercial roll-out by Sys-Control Kft.
Users and their needs
SAThical serves professional and institutional customers across the satellite value chain:
-
Satellite manufacturers and integrators (primary near-term customers) – pre-launch verification of firmware, embedded systems and onboard interfaces while defects can still be corrected.
-
Satellite operators and mission owners (Earth observation, telecom, IoT, constellations) – independent assurance of command paths, RF/TT&C links and ground systems, and reassessment after changes.
-
Ground-segment and mission-control providers – validation of privileged access, command workflows and shared, multi-operator access.
-
Defence and dual-use agencies – sovereign mission assurance under degraded or denied conditions.
-
Insurance, assurance and compliance stakeholders – secondary users of customer-approved technical evidence in their own risk and assurance processes.
The user engagement confirmed five key needs: independent third-party testing, pre-launch firmware validation, controlled RF/link security testing, requirement-traceable assurance evidence and mission-impact reporting. The main challenge is to test meaningfully without disrupting live missions and while protecting sensitive flight software – which requires customer-representative test environments.
Users involved in the project came from Germany, France, Romania and Hungary; the service targets customers across the European space sector.
Service/ system concept
SAThical delivers a scoped laboratory security assessment of a customer’s mission, organised in three modular layers that can be combined into an integrated Space–Link–Ground assessment:
-
Space segment – onboard systems and firmware: static and dynamic firmware analysis, command-handler and CCSDS command-dictionary evaluation.
-
Link segment – RF and communications security: TT&C protocol fuzzing, command-authentication and replay tests in conducted, channel-emulated or hardware-in-the-loop set-ups; GNSS/PNT resilience validation is a planned extension.
-
Ground segment – mission control and ground-station assurance: client software, API and authentication testing, network segmentation and supply-chain review.
Each engagement follows a structured process: scoping and rules of engagement, space-specific threat modelling (SPARTA, MITRE ATT&CK), controlled test execution and reporting. A measurement and evidence layer records the tested configuration, tools and observations; the assurance layer maps findings to ECSS-E-ST-80C and the ENISA Space Cybersecurity Control Framework, with optional NIS2/ISO 27001 cross-mapping. Deliverables are prioritised findings, a Security Assurance Mapping Matrix, remediation guidance, retest results and a dated, configuration-specific “Verified by SAThical” statement.
Space Added Value
SAThical protects the space assets on which European services depend. Its assessments target the real building blocks of satellite communications – spacecraft command and data handling, TT&C uplinks and downlinks, CCSDS/AX.25 protocols and ground-station infrastructure – and, as a planned extension, the resilience of the satellite navigation (GNSS/PNT) signals that missions rely on for positioning and timing. Testing on engineering models, FlatSat/HIL set-ups and controlled RF environments reproduces space-specific conditions that conventional IT penetration testing cannot: radio-link behaviour, command authentication and replay protection, constrained onboard processors and firmware-update paths.
Compared with existing approaches, SAThical combines three elements in one independent service: coverage of the Space, Link and Ground segments, with cross-segment attack-path analysis where an integrated scope is agreed; space-specific methods and threat models (ECSS-E-ST-80C, ENISA space controls, SPARTA); and traceable evidence bounded to the tested configuration. Manufacturers and operators can therefore find and correct vulnerabilities before launch, when fixes are still possible, and demonstrate the security of their space services to customers, insurers and regulators.
Current Status
The ESA Kick-Start activity was completed in October 2026. Sys-Control engaged six organisations across the satellite value chain in Germany, France, Romania and Hungary and derived eight user needs, nine user requirements and fifteen system requirements. Two critical aspects were proven: a safe, representative test environment based on laboratory hardware and a FlatSat engineering model (with BME/HUNITY), and a bounded static assessment of representative satellite bootloader firmware (with Black Cell) that produced structured findings and remediation guidance. The business plan showed break-even with two to three customers per year, and the SAThical website was launched.
Next steps are a first paid laboratory Proof Test with a customer-authorised target and a customer-led Proof-of-Concept under the ESA ACCESS/BASS programme.